Kent Moore GM Dealer Tools and more!

We are the premier J-Tool, Kent Moore, GM, Ford, Dealer Tools, and specialty automotive tool vendor on the web!
Domestic and international shipping available

Buying Experence- Review Post New Entry

Tell us about your Buying Experence.   It's like eBay Feedback!

Let others know what your experence was. 

view:  full / summary

Chevrolet Ssr coin tray/cup holder removal tool

Posted by Mark davis on May 20, 2017 at 8:50 PM Comments comments (0)

Looked high and low locally and on several sites for this part.. to repair a ongoing problem .. I found it here and after a few late night emails the part came in like 2 days .. very pleased exactly described by seller.. though I will say the site can be wonky .. but in the end it will work out great .. I now know it's interchangeable With :)Audi cars of the same years

Greetings from Sweden.

Posted by bjorkaren on April 28, 2016 at 8:55 AM

Mycket bra att göra affärer med, köpte ett begagnat vertyg till att montera servoventilen i en styrväxel. Det fungerade mycket bra, snabb frakt till sverige och bra och snabba svar på frågor samt fina bilder på vertyget. Så skicket var precis som jag väntat mig.

Very good to do business with , bought a used on tools to mount the servo valve in the steering gear . It worked very well, fast shipping to Sweden and good and fast answers to questions, and nice picture of the tool . So the condition was just as I expected.

Rekommenderar varmt att handla verktyg här.

Definitely recommended to shop tools here.

Med vänliga hälsningar från Hagfors Sverige /Daniel

Sincerely from Hagfors Sweden / Daniel

Great tool and fast shipping

Posted by Worsnop on December 26, 2015 at 1:20 AM
I had some questions about a couple tools that were answered promptly. Ordered tools and received sooner than expected. I have a busy transmission shop and will only buy specialty J tools here.

Coil spring tool

Posted by nad on October 31, 2014 at 1:55 AM

Penybont was very helpful with getting a Kent Moore J-23028 for me.  He was responsive to my concerns, his price was very reasonable, and his shipping was fast.  I was able to do the job right because of having the right tool, and because of Penybonts help.  I know I'll need more KM tools in the future and Penybont will be my main resource.

Excellent buying experience

Posted by Orenda on May 31, 2014 at 3:40 PM

I just wanted to say thank you for the tools. I received them today, and they

are exactly as described. As well, I tried them on my set of new Bilstein

struts / shocks that are due to go into my Subaru - these tools will be just the

ticket. The best part is that there will be no guessing that the strut bolts

are torqued exactly to spec. Excellent.  


Thanks for the great service - fast responses and shipping! Very much



- Calgary, Canada.


Posted by Fred on February 27, 2014 at 9:10 PM
I had a hard time finding a j34013 strut compressor that was in good shape until I found one on penybontools. I had email them for info and they got back to me quickly. After an email or two I bought myself a new (USED) tool. They were extremely helpful though the whole time they even check the delivery status for me so that I could make sure that I had someone available for time of delivery for signature upon receiving said item. I will definitely check this site in the future for tools of my own!


Posted by Denis on January 14, 2014 at 1:35 PM

Отличный магазин. 

Оперативно всё отправили, получил всё новенькое.


Оплатил 23го декабря получил 14 января. учинтывая новогоднии праздники не ожидал такой быстрой доставки, тем более что я живу в глухой деревеньки в Якутии..если кому интересно вот трекер CF110643696US


Вообщем рекомендую!!!


кстати на ебае находил такой инструмент, дороже и сильно б/у , а тут новеькое .

Finally found them !

Posted by poncho64 on April 16, 2012 at 11:00 AM

I own 3 66' pontiacs and have been looking for the KM tools listed in the shop manual for years. It was great to finally find a source for these tools, now installing control arm bushings will be a lot easier ! great communication from this company and very quick shipment.

Thank You

Obsolete Tools

Posted by HCollins on March 13, 2012 at 11:45 AM

I've been VERY satisfied with Penybont helping me find obsolete tools for my car tool collection addiction.  Organization of tool numbers makes locating tools easy.  Knowledge of the tools they sell is excellent as well.  No question about the condition of the tools being purchased.  Repeat customer and will continue to come back for more. 

Great Experience !

Posted by Mark on March 9, 2012 at 9:35 PM

Great buying experince fast, friendly service. Thanks for everything




Fine Business!

Posted by 63ragtop on March 1, 2012 at 6:55 PM

Been looking for these KM tools for years. Very happy with this purchase, prompt, professional, and reasonable price for hard to find tools.

Happy buyer

Posted by John on February 10, 2012 at 3:55 PM

Bought a special ball joint tool to split joints w/o using a pickle fork.

Very nice tool and price. Will come back for more as needed.


Posted by Henb on July 27, 2011 at 6:20 PM

The tool was easy to find and shipping was very fast.

Kent Moore tools

Posted by CorvairGA on May 26, 2011 at 12:30 AM

I received my shipment extremely fast.  Quick, accurate and a pleasure to deal with.  The right tool for the right price in the right time, with a smile.  I'll be back when I need another.  Count on it!



Kent Moore tool

Posted by dynosport on April 26, 2011 at 5:20 PM

Penybont is a very quick responding business that goes beyond expectations.  No worries or hassle.


Oops! This site has expired.

If you are the site owner, please renew your premium subscription or contact support.